Dense loading of adsorbents

Love it and share

Dense loading of adsorbents

The technology of dense loading has much more advantages than a usual loading of adsorbents and catalysts. Loading is made under supervision of skilled technicians of our company with the help of special loading unit. This unit is used to make up the adsorbent bed in the adsorber which is homogeneous in its physical-mechanical (Bulk density, porosity) and hydrodynamic properties (penetrability for filter stream, hydrodynamic resistance). Besides even loading of adsorbent reduces rising of pressure drop during cycle length.

So dense loading of the catalysts increases a cycle length and economic efficiency of the technological units.


dense loading

According to our technology adsorbent loading is made by a special loading unit.

Even distribution of the particles is achieved by changing of the inlet air pressure or inert gas. Its value depends on loading density, adsorber size and loading feed.

The loading unit is put inside the adsorber with the help of special fasteners.

It is necessary to have the source of process air or inert gas for operation of loading unit on upper area of the adsorber. The pressure in the system of technical air or inert gas should be 0,2 – 0,6 МPa.

A loading storage hopper is put on the upper part of the adsorber and it is constantly filled by adsorbents. A hoist is used to feed adsorbents into the storage hopper.

dense loading

Such technology successfully used in Bashneft 2019 year – bulk density is increased up to 12%;

Due to this technology we have got good results of performance of our products.For example, at Bashneft PSA Hydrogen recovery unit, after treatment of our adsorbents, the purity of Hydrogen is up to 99.99%; the hydrogen recovery rate is up to 90.1%.

Related blog:

CLIENT LETTER FROM BASHNEFT

 
 

Related products

01.

13X MOLECULAR SIEVE

13X MOLECULAR SIEVE FOR PREPURIFICATION FOR CRYOGENIC AIR SEPARATION

02.

3A MOLECULAR SIEVE

3A MOLECULAR SIEVE FOR ETHANOL DEHYDRATION

03.

3A-EPG MOLECULAR SIEVE

3A-EPG MOLECULAR SIEVE FOR CRACKING GAS DEHYDRATION

04.

4A MOLECULAR SIEVE

4A MOLECULAR SIEVE FOR COMPRESSED AIR DEHYDRATION

05.

5A MOLECULAR SIEVE

5A MOLECULAR SIEVE FOR HYDROGEN PURIFICATION

06.

LITHIUM MOLECULAR SIEVE

LITHIUM MOLECULAR SIEVE FOR OXYGEN PRODUCTION

Contact Us

 Libra Chemical Co., Ltd

Leave a Comment

Your email address will not be published. Required fields are marked *